| HOME | ADMIN | KOREAN |
CSS MenuMaker
AIRCRAFT ENGINE PARTS
Management for customers, Sermatech Korea is building.
Aircraft Engine Parts
Aircraft engine parts require high credibility and efficiency so these are made of expensive nickel/cobalt super alloy and titanium alloy. Various protective coatings are applied on the aircraft engine parts to overcome material limit and enhance engine performance. Protective coating technologies in aircraft engine industry have been one of the core technology for advanced aerospace industry.

SKL is applying various kinds of coatings on aircraft engine parts; wear resistant coatings using carbides to improve service life, diffusion coatings for high temperature corrosion resistance of turbine parts, thermal barrier coatings to protect parts from high temperature combustion gas, and aluminum-ceramic inorganic coatings for corrosion resistance of compressor parts. SKL is applying these coatings under the process qualification of aircraft engine OEMs such as General Electric, Pratt & Whitney, Rolls-Royce, and Honeywell.
Wear resistant coatings
Coating Process Application Applicable parts
WC Plasma,HVOF low temp. wear resistance (<500 ¡É) Compressor blade, Nozzle segment, Flap
Cr-C Plasma,HVOF high temp. wear resistance(<500 ¡É) Nozzle segment, Turbine Vane Shroud, Flap
Tribaloy
(Co-Mo-Cr)
Plasma,HVOF high temp. corrosion & wear resistance(<500 ¡É) Turbine blade
Diffusion coatings
Coating Process Application Applicable parts
Aluminide Pack, Vapor Phase high temp. hot corrosion(>850 ¡É) Thrbine Blade, Vane Combustion Liner
Chromide Vapor Phase low temp hot corrosion(<850 ¡É) Low pressure Turbine Blade Vane
Aluminide-Chromide Pack Cementation low temp hot corrosion(>850 ¡É) Turbine blade, Vane
Platinum-Aluminide Pack Cementation high temp hot corrosion(longer life) Turbine blade
Thermal barrier coating
Coating Process Application Applicable parts
YSZ
(Yttria Stabilized Zirconia)
Plasma Thermal barrier Combustion liner, Nozzle Segment After burner can
Aluminum-ceramic inorganic coatings
Coating Process Application Applicable parts
SermeTel W Slurry spray corrosion resistance(<500 ¡É) Compressor Blade, Vane,Case, Disc
SermeTel 5380DP Slurry spray corrosion resistance & fine surface finish(<500 ¡É) Compressor Blade, Vane,Case, Disc
SermeTel 725 Slurry spray corrosion resistance(<500 ¡É) Compressor Blade, Vane,Case, Disc
Abrasive/abradable coatings
Coating Process Application Applicable parts
Nickel Graphite Powder flame Air sealing Compressor Case, Rotor
Silver Alloy Wire flame Air sealing Turbine Air Seal
Alumina Plasma Air sealing Compressor Air Seal
ADDRESS: #1204, changwon-daero, Seoungsan-gu, Changwon-si, Gyeongsangnam-do, Korea(51542) | Tel : 82-55-260-1240 | Fax : 82-55-287-8717
copyright¨ÏSERMATECH KOREA. All rights reserved. since 2014